What All Is Needed For New Clutch??How Much? Where?
Thread Starter
Registered User
Joined: Mar 2001
Posts: 16
From: Scottsdale, AZ
What All Is Needed For New Clutch??How Much? Where?
Ok guys it is time for a new clutch and I think I will end up going with the new 02' Z06 clutch setup. I don't have a lot of money but I want something that is good for daily driving but good enough to handle some good street racing. I know I need the clutch disc, flywheel, t/o bearings, and slave cylinder? Do I need the new master cylinder too? Where can I find these parts at the cheapest? I want to upgrade to the whole new system...
Thanks guys
------------------
99' Red Camaro Z28 (M6)
Flowmaster AT Exhaust, K&N, !EGR, Nokya Purple Bulbs, Clear Corner Lenses, Whisper Carbon Fiber Lid, FTRA, BMR STB, Painted Calipers, Billet Grille, Front Powerslot Rotors, and BMR Adjustable Panhard Rod
www.azfbody.com
Best E.T. ....13.53@ 106.81mph
309.2RWHP/318.8RWTQ
Thanks guys
------------------
99' Red Camaro Z28 (M6)
Flowmaster AT Exhaust, K&N, !EGR, Nokya Purple Bulbs, Clear Corner Lenses, Whisper Carbon Fiber Lid, FTRA, BMR STB, Painted Calipers, Billet Grille, Front Powerslot Rotors, and BMR Adjustable Panhard Rod
www.azfbody.com
Best E.T. ....13.53@ 106.81mph
309.2RWHP/318.8RWTQ
Registered User
Joined: Jan 2001
Posts: 14
From: Chandler, AZ
I would like to know too. I am still on my stock clutch with 44,XXX miles on my car and it still is showing no signs of slipping yet. I would just like to get some prices for the future.......
------------------
Jeff
98 Z28 13.4@107.3/312.3RWHP 324.9RWTQ
-direct flow air lid, K&N air filter, exhaust cutout w/ McCord power plate.
99 GTP 14.6@96
-K&N air filter, 3.25" pulley, Tranny cooler, 3" int. pipe with stock mufflers.
------------------
Jeff
98 Z28 13.4@107.3/312.3RWHP 324.9RWTQ
-direct flow air lid, K&N air filter, exhaust cutout w/ McCord power plate.
99 GTP 14.6@96
-K&N air filter, 3.25" pulley, Tranny cooler, 3" int. pipe with stock mufflers.
Registered User
Joined: Sep 2001
Posts: 491
From: Pewee Valley,Ky
check this out guys
www.lmperformance.com/603/1.html
you probably don't need a new master but for sure get an upgraded slave which can be found at the same site for like $100.00
or you can do a Cartek clutch package for about $900.00 shipped and get everything but a new flywheel. The Cartek clutch rocks IMO.
------------------
2000 Sebring Silver Camaro SS
Mods? Well...yes, enough mods to have MAD horsepower.
More mods to come? Well..yes, working on achieving INSANE horsepower.
Last dyno 336hp and 361 torque. Have done some stuff since then.
Car has gone a best of 12.64@111.67mph with a 60' of 2.15
http://camaroz28.cardomain.com/id/scottss2658
www.lmperformance.com/603/1.html
you probably don't need a new master but for sure get an upgraded slave which can be found at the same site for like $100.00
or you can do a Cartek clutch package for about $900.00 shipped and get everything but a new flywheel. The Cartek clutch rocks IMO.
------------------
2000 Sebring Silver Camaro SS
Mods? Well...yes, enough mods to have MAD horsepower.
More mods to come? Well..yes, working on achieving INSANE horsepower.
Last dyno 336hp and 361 torque. Have done some stuff since then.
Car has gone a best of 12.64@111.67mph with a 60' of 2.15
http://camaroz28.cardomain.com/id/scottss2658
Thread
Thread Starter
Forum
Replies
Last Post