Vids of my Z after the h/c swap..
Vids of my Z after the h/c swap..
I finished my h/c swap about a month and a half ago now.. Just now finding a way to host the clips.
This is the first time that it was started with the new cam.. It idled almost perfectly.. Sounded pretty damn good too..
Lemme know what you think..
Please right click and save as....
http://www.angelfire.com/ult/insayne...230CamSwap.wmv
http://www.angelfire.com/ult/insayne...TSPRumbler.wmv
This is the first time that it was started with the new cam.. It idled almost perfectly.. Sounded pretty damn good too..
Lemme know what you think..
Please right click and save as....
http://www.angelfire.com/ult/insayne...230CamSwap.wmv
http://www.angelfire.com/ult/insayne...TSPRumbler.wmv
Last edited by Z28Venom; May 15, 2004 at 11:44 PM.
Originally posted by LWM
Sounds nice.
How many rpm do you run it up to?
Dyno #s ??
Drivability ??
Just curious
LWM
Sounds nice.
How many rpm do you run it up to?
Dyno #s ??
Drivability ??
Just curious
LWM
Rev Limiter is 6800.. I shift at 6600 w/raptor performance shiftlight
Dyno numbers? still waiting to get it done...
Drivability... After having it tuned, drives almost like stock.. Just have to deal with that sewing machine sound..
Originally posted by Natedog51
How agressive, power wise, is that cam compared to the LS Hot Cam?
Later
Nate
How agressive, power wise, is that cam compared to the LS Hot Cam?
Later
Nate
I'm sure that I'm making atleast 425... I'd be happy with that much..
You really feel this cam at about 3k rpm.. The car seems to just take off...
Sweet, I will have to look into this cam. I'm looking to buy an LS1 but won't go as overboard with mods like I did my old LT1 I used to have (Nitrous, rear end, DS, bolt-ons, complete rebuild, etc..). Thanks for the info.
Later
Nate
Later
Nate
Originally posted by FLIPPINZ28
would a 100shot go good with this cam? sounds great thanks kenny
would a 100shot go good with this cam? sounds great thanks kenny
For nitrous you want a cam with more exhaust duration, and this cam doesn't have that.. So I'm guessing a 100 shot on this cam would equate to about 55-60 HP.. Just a guess..
I'll find out soon..
Originally posted by AL SS590 M6
What are your 1/4 times and MPH with this cam and heads?
What are your 1/4 times and MPH with this cam and heads?
If I were anywhere other than Hawaii.. I could run at least a 12.5 on street tires and definitely 11's on Nittos..
But here.. I'd be happy running a 12.1- 12.2 on Nittos.. Track conditions are just that terrible..
Thread
Thread Starter
Forum
Replies
Last Post
colts0455
LT1 Based Engine Tech
7
Jul 28, 2015 11:28 PM
Bignasty85
General 1967-2002 F-Body Tech
12
Mar 3, 2015 04:05 PM



. Sounds real nice!
