LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

tranny f'd up ??? q inside

Thread Tools
 
Search this Thread
 
Old Mar 8, 2003 | 08:05 PM
  #1  
crakpotjoe's Avatar
Thread Starter
Registered User
 
Joined: Oct 2002
Posts: 111
From: Placer County, California
tranny f'd up ??? q inside

i was out driving today and i was doing a brakestand and i popped the clutch out and walked it a little way then when i let completly off the brake and shifted into 2nd there was no pressure back on my foot from the clutch and when i let the pedal back out the gears dont grab till maybe an inch and a half or two inches from the top.

what is the problem?

someone said it might be the pressure plate? could this be it

TIA
Old Mar 8, 2003 | 08:41 PM
  #2  
#7's Avatar
#7
Registered User
 
Joined: Aug 2002
Posts: 568
From: Redding CA. USA
Sounds like you fried the clutch,not completely though...??
Old Mar 10, 2003 | 12:56 AM
  #3  
stik6shift98's Avatar
Banned
 
Joined: Mar 2002
Posts: 4,254
From: Darien, IL, usa (Chicago W.Suburbs)
yup my best bet would be that the clutch is gone....done with.....fried......burnt up.......fawked......
Old Mar 10, 2003 | 09:43 AM
  #4  
rncotton's Avatar
Registered User
 
Joined: May 2001
Posts: 1,122
From: Memphis, TN, USA
It will probably get better over the next few drives. Mine did something similar.

It's just our crappy clutches. I'm going to replace mine eventually, but I really want to see 60,000 miles out of the stock POS clutch.
Old Mar 10, 2003 | 06:41 PM
  #5  
stik6shift98's Avatar
Banned
 
Joined: Mar 2002
Posts: 4,254
From: Darien, IL, usa (Chicago W.Suburbs)
what year is the car????

if its below 01 its prob the crappy hydraulics
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mikes 1994 z28
Drivetrain
1
Oct 10, 2015 07:55 AM
Bxlt1
Drivetrain
2
Sep 29, 2015 03:18 PM
drt
LS1 Based Engine Tech
6
Sep 27, 2015 04:39 PM
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM




All times are GMT -5. The time now is 01:50 AM.