SLP 485hp Head & Cam Package
Its no harder to install than any other H/C package. The power rating is fly wheel though not rwhp. Friend of mine has it on his A4 firehawk it put down 400 hp 401tq. So its a ok package but honestly for how much it is there are better offerings out there.
Call Mike at Rapid Motorsports. He just installed a H/C set-up on a 2002 SS M6 and got 503 RWHP and 437RWTQ.
www.rapidmotorsports.com
www.rapidmotorsports.com
i have not checked prices at rapidmotorsports however they had a test camaro at there website which listed what mods they did and 1/4 times so i was impressed with that. last winter my camaro club toured TPIS specialties. i believe their prices were $1200 for just the porting, and $1700 total for ls6 springs and i think new valves were included? (maybe). after reading slp's catalog i may decide to go with there spring kit (only) because they claim there springs are better than ls6. i would for sure spend a little extra for light weight valves. i think ls6 valves are sodium filled. i'm no drag racer, just my opinion.
Originally posted by 99snkklr
Call Mike at Rapid Motorsports. He just installed a H/C set-up on a 2002 SS M6 and got 503 RWHP and 437RWTQ.
www.rapidmotorsports.com
Call Mike at Rapid Motorsports. He just installed a H/C set-up on a 2002 SS M6 and got 503 RWHP and 437RWTQ.
www.rapidmotorsports.com
mikey did a stage 2 head and cam on my car and i put 425 to the wheels. If that doesnt sound impressive enough, i did it only with a lid and long tubes w/ cats with a restrictive centermount exhaust.
mikey recommended doing a ported TB, and a better catback or atleast muffler, he said i should be 440+ and if i delelted the cats, i would be looking a bit over 450rwhp.
and with his stuff, its definitly proven! he has a great rep. and his prices arent out rageous! plus he knows his $hit and is always available when u have a question! i am 100% happy he did my car!
Re: SLP 485hp Head & Cam Package
Originally Posted by Droopy
I SECOND THIS RECOMMENDATION!!!
mikey did a stage 2 head and cam on my car and i put 425 to the wheels. If that doesnt sound impressive enough, i did it only with a lid and long tubes w/ cats with a restrictive centermount exhaust.
mikey recommended doing a ported TB, and a better catback or atleast muffler, he said i should be 440+ and if i delelted the cats, i would be looking a bit over 450rwhp.
and with his stuff, its definitly proven! he has a great rep. and his prices arent out rageous! plus he knows his $hit and is always available when u have a question! i am 100% happy he did my car!
mikey did a stage 2 head and cam on my car and i put 425 to the wheels. If that doesnt sound impressive enough, i did it only with a lid and long tubes w/ cats with a restrictive centermount exhaust.
mikey recommended doing a ported TB, and a better catback or atleast muffler, he said i should be 440+ and if i delelted the cats, i would be looking a bit over 450rwhp.
and with his stuff, its definitly proven! he has a great rep. and his prices arent out rageous! plus he knows his $hit and is always available when u have a question! i am 100% happy he did my car!
Re: SLP 485hp Head & Cam Package
Originally Posted by camaronewbiess
How do you go about something like this?? do you send them something or do they install it or what...im very new to this stuff.
he responds to emails within a day, might be a little longer now, for he is swamped with work, but all you need to do, is just make an appt, drop ur car off and then soon after you have a monster!
much like any performance shop, they install what you want and then tune it!
just tell mikey what you are looking for, give him a descirption of what you are looking for in performance and every day driving and you go from there! i am happy i had him do it!
you need more specific detail, shoot me an email
dave
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



