has anyone put a set of stud mount rockers on a ls1 yet i have been thinking about the comp 1.75 but i wont to keep the pedastal mount they are so much easier to setup

did a lot of research on those couple weeks ago.

the problem is that the stock springs are all but maxed out on lift...so even going from 1.7 to 1.75 you'd need to change springs

which makes the task alot more involved.

and if you plan to do a cam later (or have one now) EVERYONE reccomends against changing rockers...something about the ramps too steep on the cams to work properly

thanks for the advice i already have a cam and springs now i just want a better rocker i hate the factory rockers they make too much noise

yella terra 1.7 ratio would be a good choice for an aftermarket cam

there is an install guide on either www.ls1howto.com or www.ls1camaro.net