Hey all, just for a little background my 95V6 was swapped for a 98LS1 block about 2 months ago. I have worn it in quite well, and everything feels great.

I am now looking ahead to mods. I already have a CIA (remember its a 95, no air box) installed, and Corsa exhaust. I was considering a heads, cam swap and work on the suspension a bit. The factory DeCarbons have been on for over 95k.

I am looking for suggestions on a mild cam (ok its don't have to be too mild!) for the car, I take it to the strip about once a month and besides that I run it at night when cruising (read: not a daily driver). I want some good lope to it, nothing too rough.

I have a local mechanic that did the swap for me, I am sure he will have suggestions about the heads. Does anyone here have some numbers that have worked well for them?

Also in the valvetrain. Would I gain much with new RR's and springs?
-----------------------------------------------------------------

Suspension is another story. I took the car to about 130 a few weeks ago and it felt very loose, like I was floating on the ground.

I was thinking Koni SA's with new springs. Also SFC, LCAs, Pan-hard, Torque Arm. Not sure on brads for this stuff. Sonph has really good prices.


~Taylor

 

headers?? A-4, M-6?
IMO TR makes some of the best cams
just my o2

------------------
//BLACK 99 SS//M-6//T-Top//TR 224/224 .561/.561 112LSA//CNC Stage 2 Heads 2.08"Intake-1.60" Exhaust Valves//Volant Cold Air Induction//BBK 80mm Throttle Body//SLP Stage 1 Suspension Kit// Powerslut Rotors//Hawk Pads//Mosser 12 bolt-4.10 Gears//SPEC Stage 3 Clutch//ASP Underdrive Pulley//Lingenfelter Aluminum Driveshaft//BMR Sway Bars-Lower Controll Arms-Panhard Rod-Track Pak-Strut Tower Brace//Taylor Wires-NGK plugs//HPP 3-160 Stat//Skip Shift Eliminator//B&M Ripper Shifter//SLP LT Headers-SLP ORY No Cats//Borla Cat Back//Dynomax Bullit//ECT...