There is someone selling a cam near me for $150 it's made by CAM MOTION INC; Here are the specs:

Valve Lift: .530 / .530

Duration @ .050: 220 / 220

Lobe separation 119.5

Intake centerline 115.5

I was wondering if anyone has ever heard of this brand; as well as if anyone knows roughly how much the price of an install would be with a highly skilled installer or how many hours it would take just ballpark figures

Also does anyone have any idea how much HP and TQ I could get with this considering my current mods(listed below); like I said before just ballpark figures

Thanks

 

I am making 381 rwhp/373 rwtq with a 218/228 .525/.525 112 GM Hotcam and boltons. That cam should be in the same neighborhood, with similar mods. It will idle much better than the Hotcam.

 

yes, cam motion is a good brand and they manufacture some very good and agressive grinds, my friends TA is making 420hp with stage 2 heads and a cam from cam motion. but you may want to take a second look at buying a cam with a 119 lsa, personally, thats a little to weak for me. anywhere from 15 to 25 in hp gain. i got my cam, pushrods and springs done for $350 by i guy i can seriously call an LS1 expert, if you live in the houston are, you can find him at houston-f-body.org