New bone stock 2000 SS times
Thread Starter
Registered User
Joined: Nov 2000
Posts: 1,148
From: AZ
New bone stock 2000 SS times
I made it back out to the track today. I ran a best of 13.53 @ 106.42 with a 2.25 60'. I'm still trying to figure out to launch this car. The LS1 is much more picky launching than my LT1 ever was. I think it's time for a lid and a cutout. 
Thread Starter
Registered User
Joined: Nov 2000
Posts: 1,148
From: AZ
Originally posted by MISOMWS6
Yup get that '60 in the low 2.0xx high 1.9xxx and you will be a lid or cat-back away from 12's!!!!! Good luck
Yup get that '60 in the low 2.0xx high 1.9xxx and you will be a lid or cat-back away from 12's!!!!! Good luck
Next time out I'm hoping for a 2.0x 60' and a 13.3-13.2. I could have launched the car harder - I was still bogging on that 2.25 60'.
Registered User
Joined: Jun 2003
Posts: 573
From: Just outside of "D-town"
Re: New bone stock 2000 SS times
Originally posted by 97bowtie
I made it back out to the track today. I ran a best of 13.53 @ 106.42 with a 2.25 60'. I'm still trying to figure out to launch this car. The LS1 is much more picky launching than my LT1 ever was. I think it's time for a lid and a cutout.
I made it back out to the track today. I ran a best of 13.53 @ 106.42 with a 2.25 60'. I'm still trying to figure out to launch this car. The LS1 is much more picky launching than my LT1 ever was. I think it's time for a lid and a cutout.
Dude all you need is tires...general rule of thumb is for every tenth in the 60 is 2 in the 1/4....loose that 1/4 second and your at 13 flat...learn how to launch it with some sticky tires and youll be seeing 12.8's
Registered User
Joined: Mar 2004
Posts: 350
From: Chicago
I have a 98 Z. pretty much stock, look at my sig. But i have the 2:73 gears, I ran 13.6 at 103. with an auto all you need to do is punch it and not spin tires. i hooked great and still only ran 13.6. any reasons why ?? i was hoping for 13.4 or so. my 60 ft times were under 2
Registered User
Joined: Jun 2003
Posts: 573
From: Just outside of "D-town"
Originally posted by gav'spurplez
I have a 98 Z. pretty much stock, look at my sig. But i have the 2:73 gears, I ran 13.6 at 103. with an auto all you need to do is punch it and not spin tires. i hooked great and still only ran 13.6. any reasons why ?? i was hoping for 13.4 or so. my 60 ft times were under 2
I have a 98 Z. pretty much stock, look at my sig. But i have the 2:73 gears, I ran 13.6 at 103. with an auto all you need to do is punch it and not spin tires. i hooked great and still only ran 13.6. any reasons why ?? i was hoping for 13.4 or so. my 60 ft times were under 2
Gears my friend...or lack thereof
....id suggest 3.23-3.42's...and a higher convertor...2,400 for a stock motor would be good...after the YOU WILL spin the tires =)
Registered User
Joined: Mar 2004
Posts: 350
From: Chicago
Originally posted by MY91Y84
Gears my friend...or lack thereof....id suggest 3.23-3.42's...and a higher convertor...2,400 for a stock motor would be good...after the YOU WILL spin the tires =)
Gears my friend...or lack thereof
....id suggest 3.23-3.42's...and a higher convertor...2,400 for a stock motor would be good...after the YOU WILL spin the tires =)
Thread Starter
Registered User
Joined: Nov 2000
Posts: 1,148
From: AZ
Originally posted by psychocabbage
why mod it now? why not get the most out of it while learning to drive it better so when you do mod it you are seeing the true benefits of the mod?!?!
why mod it now? why not get the most out of it while learning to drive it better so when you do mod it you are seeing the true benefits of the mod?!?!
I'm not going to do any mods until I get at least a 13.3 out of it bone stock.
