LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

Need someone who knows about the unibody on my Z28. My car was hit.

Old Oct 24, 2002 | 04:17 PM
  #1  
Dimoncutr's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 85
From: Clarkston,Mi.U.S.A.
Need someone who knows about the unibody on my Z28. My car was hit.

My car was just hit on the rear left corner panel while it was parked. The rear was moved about 3 feet over. It was hit hard enough that the front right corner panel was shifted out about an inch.

Is the unibody bent?

I ask, because the frame on the left side next to the gas tank is slightly curved and the other side is more straight.
Old Oct 24, 2002 | 11:59 PM
  #2  
Jerm93z28's Avatar
Registered User
 
Joined: Nov 1999
Posts: 363
From: spartanburg,sc usa
you more than likely have frame damage throughout the car if it was hit that hard. especially the front fender being knocked out of whack.... there is probably nothing you can do with it. did anything inside the car move around, such as seats/console/dash? i bet the back of the rear seat wont latch anymore, either.
jeremy
Old Oct 25, 2002 | 06:51 AM
  #3  
Dimoncutr's Avatar
Thread Starter
Registered User
 
Joined: Aug 2002
Posts: 85
From: Clarkston,Mi.U.S.A.
I had it towed over to the shop where I go. I talked to my friend over there and he said that they're going to go over it with a fine tooth comb. I was to upset to check anything inside.

The owner of the shop said he feels his a*****e puckering up. I couldn't believe he had the gull to say this to me. On top of it he's the landlord of the property I use for my buisness. Everyone who knows me would tell you if there was anything wrong with this car, it would be fixed the next day. I just spent over 1000 bucks to fix other things on it Wednesday. God do I feel a empty hole in my gut.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
30thZ4C
Fuel and Ignition
0
Dec 26, 2014 05:09 PM
TYLER94Z28
Forced Induction
5
Dec 3, 2014 07:05 AM
USAirman93
General 1967-2002 F-Body Tech
4
Nov 24, 2014 03:37 PM
Black93lt1
General 1967-2002 F-Body Tech
7
Nov 21, 2014 07:30 PM
Queens94z28
LT1 Based Engine Tech
5
Nov 20, 2014 06:03 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:20 PM.