Hey,
I got my dynamouth installed about 2 months ago. Its great. I can soft foot around or go tear assing along. BUT I want something even louder for those times when there is some jack *** with a mustang that is actually louder than me. This will not do!! I have an ORP ordered, but I'm putting in a cutout. When we did the dynomouth, we put the bullet in the exact same spot as the stock resonator in the I pipe. I don't wanna put the cut out after the bullet. Will the cut out in front of the bullet be too close to the y pipe/ manifolds? Will interfere with flow into the bullet when closed?
BadAndy

 

ttt

 

Who makes the dynomouth? Get headers and an offroad pipe, thatll be plenty loud, or save some money and just get an offroad pipe and 02 simms.

 

heh that off road pipe woudl make your car plenty loud..

wait till you get tired of the loudness..

 

Yeah, if you want a louder Dynomouth, just put in that ORP. The cats muffel the exhaust a whole lot more than you would think.
Dave

 

A couple of guys here in Memphis have done the Dynomouth, minus the bullet muffler.

So from the cats, it goes into the Y, then into a straight I-pipe, over the rear axle, and into another Y out to the tips.

It sounds INCREDIBLE! (and it's not too loud)