MAC offroad y-pipe + cutout?
#1
MAC offroad y-pipe + cutout?
i'm trying to not mess with my emissions and thinking of keeping stock headers and bolting on an ORY and weld an electric cutout to it.
then for emission, bolt back on the stock Y-pipe with cats.
1. is it easy to swap the stock Y-pipe?
2. how much gain do you guys think with the cutout uncapped?
3. how much gain with the cutout closed and going through the ORY pipe (no cats)?
then for emission, bolt back on the stock Y-pipe with cats.
1. is it easy to swap the stock Y-pipe?
2. how much gain do you guys think with the cutout uncapped?
3. how much gain with the cutout closed and going through the ORY pipe (no cats)?
#2
I was going to get the ory pipe too, but almost 200$ plus the O2 simmulators ??? It will definately sound good but you're saying you want the cutout so you'll get sound anyway
IMO - there's better stuff out there to spend money on
IMO - there's better stuff out there to spend money on
#3
i was thinking of doing the electric cutout and ORY to bypass going through the cats.
if i put on the electric cutout, it has to come after the cats, so when i open the cutout, the cats are still restricting flow.
what do you think?
(or where is the best place to put a cutout on a stock exhaust?)
if i put on the electric cutout, it has to come after the cats, so when i open the cutout, the cats are still restricting flow.
what do you think?
(or where is the best place to put a cutout on a stock exhaust?)
Thread
Thread Starter
Forum
Replies
Last Post
tdigger9899
General 1967-2002 F-Body Tech
9
09-07-2015 10:56 AM
PFYC
Supporting Vendor Group Purchases and Sales
2
08-24-2015 06:41 AM