Speaking performance wise...thanks guys

 

stock 01 M6 lid+hotcam+catback ( stock heads,manifolds,cats)
330/330

here is a dyno
http://www.ls1info.com/article.php?sid=118

I hear a little tuning will work great

 

330/330 is not impressive!

My car pulled near those numbers with just MAF ends on a hot day! I would expect more.

------------------
2002 Camaro SS #3586 6M Sebring Silver, T-top, Billet Grille, Hurst shifter, !CAGS, Whisper CF Lid, Holly PowerShot filter, Corsa Catback w/full polish tips, 160 Thermo, SLP fan switch, ASR reverser, TA axle cover w/stud kit, MAFT, NX wet kit(150)purge,heater,remote opener, FPSS,MSD WS, Autometer gages, Hotchkis STB, LCA's, APHR.

Baseline Dyno: 317.9RWHP 335.9RWTQ with MAF ends only: 325.6RWHP 350RWTQ. (Stock)1st 1/4 mile 13.46 @106.9 2.23-60'
new best 13.306 @107.89 2.12 60'
4-sale MAF ends....now using N20 so need to
ditch them.
http://members.***.net/sscargo/Camaro.htm

 

Thats what i thought..looks like nothings changed since the LT4 Hot Cam kit..looks like im going w/ something more aggresive..thanks guys

 

Those numbers suck.. I imagine with headers, and cai, and a few breather mods that maybe the cam gains would be more prominent with help from those.. Seems like a good close to stock cam for the person who doesn't want a big .550+ lift cam.

-Josh

 

I saw someone with headers and all the other bolt ons pull 391RWHP with the Hotcam. This was with stock heads.

The post is on LS1.com.

------------------
1983 Monte Carlo, 307 Stroker, TH350, 3.73 10-Bolt - SOLD 8/19/02

Future F-Body Owner

 

330/330 with stock manifolds, full exhaust/w stock cats, no ported TB, pulleys, short belt or dyno tricks and no tuning is what you would expect. Just proves this cam works with stock manifolds as well.

 

Hey,
well in march of this year i went 11.60's @ over 116 mph with the stock heads and intake manifold..i do have converter,gears,pullies,maf,whisper,etc... but when i put the cam in i picked up 4 rwhp with the stock manifolds in place...i was pissed lol..so then i put slp longtubes on the car and picked up 37 to the wheels...this is an exaust happy cam bro so get the exaust set up nice..then you will LOVE the cam..plus with my exaust set-up (slp longtubes to open 3 inch y-pipe) it sounds like a freakin funny car! just my 02'....but you will like the cam man its great.later,
carter

------------------
'2000 onyx z28
stock heads,intake,bottom end...and all motor! 11.63@116.74 1.54 60'.....on nx 125 wet..11.01@126 with a slipping tranny and some traction issues...new times soon...my car can be seen here!!http://www.horsepowerstore.com/page.asp?id=19