On a limited budget...what mod is next?
Less expensive mods would be some gears or underdrive pullies. Both around $200 or so then a little more for install (if needed).
A stall would be real nice, and so would headers, they are both nice upgrades.
A stall would be real nice, and so would headers, they are both nice upgrades.
Remove your air silencer, port and descreen your MAF, both are free. Throttle Body Bypass, thats about $10 worth of materials. Check it out on installuniversity.com. Gears are cheap. They really make the car feel a sh*tload faster and you can get them from summitracing for less than $200.
Originally posted by stik6shift98
whats an air silencer?????
whats an air silencer?????
Originally posted by Black01_Z
Remove your air silencer, port and descreen your MAF, both are free. Throttle Body Bypass, thats about $10 worth of materials. Check it out on installuniversity.com. Gears are cheap. They really make the car feel a sh*tload faster and you can get them from summitracing for less than $200.
Remove your air silencer, port and descreen your MAF, both are free. Throttle Body Bypass, thats about $10 worth of materials. Check it out on installuniversity.com. Gears are cheap. They really make the car feel a sh*tload faster and you can get them from summitracing for less than $200.
Originally posted by stik6shift98
whats an air silencer?????
whats an air silencer?????
Originally posted by Black01_Z
The free ram air mod. Its the little piece of plastic you cut thats underneath the airbox to get more air to it from underneath the car. Check it out at installuniversity.com
The free ram air mod. Its the little piece of plastic you cut thats underneath the airbox to get more air to it from underneath the car. Check it out at installuniversity.com
All that said, I do agree with Black 01_Z on one point, gears would be a good mod to go with next. An ASP underdrive pulley is also budget minded, though not as noticable. If you have a bit more, go with a new torque converter.
Headers are good, but not on a budget.
Cam would best follow the headers, $600 if you do it yourself, $900-$1000 if someone else does it.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
Sep 11, 2015 09:44 AM



