Lid doesn't fit with SLP bellow

Reply Subscribe

Thread Tools

Search this Thread

Oct 2, 2003 | 05:50 PM

CSULAZ28

Thread Starter

Registered User

Joined: Feb 2003

Posts: 231

From: Los Angeles, CA

Lid doesn't fit with SLP bellow

I just installed my SLP bellow and currently have a Whisper Lid. When I tried locking the lid down it didn't want to close properly. The SLP bellow wasn't allowing me seat the lid properly. Anyone run into this problem? If so, what do you reccommend?

Oct 2, 2003 | 06:00 PM

Knowklew

Registered User

Joined: May 2003

Posts: 897

From: Bartlett, IL

ditch the SLP bellow...

Oct 2, 2003 | 06:41 PM

Lan01z

Registered User

Joined: Aug 2003

Posts: 273

From: Kansas

Re: Lid doesn't fit with SLP bellow

Quote:

Originally posted by CSULAZ28
I just installed my SLP bellow and currently have a Whisper Lid. When I tried locking the lid down it didn't want to close properly. The SLP bellow wasn't allowing me seat the lid properly. Anyone run into this problem? If so, what do you reccommend?

Keep workin at it, it will eventually fit right. Mine was a real trick to get in there too. Don't ditch the bellow.

Oct 3, 2003 | 12:52 PM

KamaroL98

Registered User

Joined: Mar 2001

Posts: 514

From: Columbia, South Carolina

It will wwork, just keep relineing everything up. Make sure the bellow and everything is pushed back as far as it goes. It canbe a trick to get lined up properly, i still have problems with mine sometimes.. But i have the whisper lid and bellow like u so yours will work.