Just installed Z06 cam in my 02 SS!
Thread Starter
Registered User
Joined: Apr 2003
Posts: 33
From: Austin, TX
Just installed Z06 cam in my 02 SS!
I just had JJ at LS1Solutions in Tx install my Z06 cam which he supplied the cam, springs, gaskets and labor for $550!! I dynoed the day before with the mods listed below and had 355 RWHP and dynoed it again today after the cam install and gained 30 RWHP!! So I am now sitting with a few bolt ons, not even headers and now have 385 RWHP!!
If anyone needs his contact info, he is on LS1.com as a regional sponser as LS1Solutions.
Thanks,
Jason
Dyno Results
If anyone needs his contact info, he is on LS1.com as a regional sponser as LS1Solutions.
Thanks,
Jason
Dyno Results
Last edited by 02TxCamaroSS; May 29, 2003 at 03:43 PM.
How did the overall curve look? Typically the curve looks the same up until about 4500 rpm or so.
Registered User
Joined: Jul 2002
Posts: 479
From: Clearwater, Florida
After I get my headers in a couple months, this is what I'm looking at next.
The best thing about is 99% of people won't even be able to tell it's a different cam.
Just curious, and I'm not doubting you...but 350 rwhp with just a lid and exhaust. That's insane.
The best thing about is 99% of people won't even be able to tell it's a different cam.
Just curious, and I'm not doubting you...but 350 rwhp with just a lid and exhaust. That's insane.
Registered User
Joined: Jun 2001
Posts: 211
From: College Station, Austin, TX
I couldnt fing him on the sponsors page. Do you think that you can post a link to his page, I searched and couldnt find that etheir. That definatly seems awsome. I wonder if the dealer could tell on warrenty work ???
Registered User
Joined: Apr 2001
Posts: 441
From: Hawaii
Originally posted by 02TxCamaroSS
As for warranty work, I did the Z06 cam because you really can't tell it has a cam in the car unless you get on it! It also has a stock smooth idle.
As for warranty work, I did the Z06 cam because you really can't tell it has a cam in the car unless you get on it! It also has a stock smooth idle.
Last edited by Drew778/94Z; May 29, 2003 at 09:16 PM.
Registered User
Joined: Feb 1999
Posts: 83
From: Austin,Tx
Intresting dyno graph. ZO6 cam actually lost torque and HP below 4000rpms or so. decent peak HP though and great install price. better be good off the line or have enough room for a top end charge. I'd like to see the LPE GT2-3 cam's dyno graph.
Last edited by Rickm; May 30, 2003 at 12:03 AM.
