I am having a problem. The pressure plate will not fully clear the discs and floater assembly and there is a huge gap between the pressure plate and the shims on the flywheel!
I have no clue as to why this is.

------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps

 

Okay this really sux. The stupid rental car place won't let me rent a car and I'm 18, go figure. TTTTT

------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps

 

Looks like I'm gonna just take the floated and FW back off and fiddle with it.

------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps

 

So now when I put the pressure plate on the bottom disc doesn' move?? I know theres supposed to be a gap when you put the floater over the bottom disc but is the freeplay in the bottom disc supposed to be retained after the install of the pressure plate?? Help me please!


------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps

 

maybe people on the other board would know better?

have you tried calling the place you bought it at for info?

 

Well it looks like I'm going to shim the bolts that hold the pressure plate to the FW a little more. That should do it.

------------------
'99 Z28 M6
Mods: Click here!
Best Time: 13.3691 @ 106mph (no N2O)
60ft: 2.12
AOL IM: Bubblesnaps