Harlan Shift light install problems
08-09-2004, 04:44 PM
#1
Registered User
Thread Starter
Join Date: Jun 2003
Location: Amarillo Texas
Posts: 712
Harlan Shift light install problems
red- to 12v
black to ground
green to tach wire of pcm, on a 98 it says Blue connector pin 35 white wire.
My problem is when i hook the green wire to the white wire the cars tach goes dead, it reads nothing.
Any ideas why? As soon as i unplug the green wire the car tach work agian.
This is on a 98 Z
black to ground
green to tach wire of pcm, on a 98 it says Blue connector pin 35 white wire.
My problem is when i hook the green wire to the white wire the cars tach goes dead, it reads nothing.
Any ideas why? As soon as i unplug the green wire the car tach work agian.
This is on a 98 Z
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM
MIGHTYMOUSE
Car Audio and Electronics
5
08-29-2002 09:18 AM