Do they make this intake for the l92 heads? Or will the one for ls1/ls6 fit on those heads?

Thanks,
Nick

 

as far as i know all the intakes are interchangeable...at least on the heads side...some of the TBs are different i think.

 

If your talking about the L76 heads you will need the L92 intake. L76 heads have square intake ports that are not compatable with LS1/LS6/Fast LSx intakes.

 

I think GM released the part number for it.

You can only use the L92 intake for it or a custom intake I believe. I know for a fact that the LS1/LS6 will not work.

Mike

 

Fixed.

But, you can use LS6 heads w/ FAST on an L92 block. Wouldn't want to though. Much, much rather have an L76 with out-of-the-box L92 heads for a 400+ inch motor than FAST and the very best out-of-the-box LS1/6/2 heads. That's for any aplication, street or strip. Just my $.02.

 

F.A.S.T. NEEDS to get on the ball!!!!

 

Why? The L76 is cheap and ive seen posts where people have made more than 500 rwhp NA with it.

 

I concure with Al the L92 is a rectangular intake port instead of a cathedral intake port like the LS1/2/6 heads. (well LS6 and LS2 heads are the same).

At this time FAST does not make a manifold to work with the L92 intake port.