Estimate this power combinations
Estimate this power combinations
Heres what i plan to get in the next few months:
Cutout with electrical switch
Borla catback
SSRA (Supersucker ram kit)
SLP Lid
Holley Air filter
How much power do you think i will be running ? Approx 1/4 times ? Can I get into the 12's with that ?
BTW i have a 2000 Z28. Question: SSRA is another option for the CAI, right ? Meaning that i only can i one or the other, correct ? Thanks : )
Cutout with electrical switch
Borla catback
SSRA (Supersucker ram kit)
SLP Lid
Holley Air filter
How much power do you think i will be running ? Approx 1/4 times ? Can I get into the 12's with that ?
BTW i have a 2000 Z28. Question: SSRA is another option for the CAI, right ? Meaning that i only can i one or the other, correct ? Thanks : )
Re: Estimate this power combinations
Originally posted by southpaw
Heres what i plan to get in the next few months:
2000 Z28 lets assume a stock car pulling 295rwhp
Cutout with electrical switchloss of torque, small hp gain - 300rwhp
Borla catback why you would add a cutout to another cutout, I have no idea.. No gain. Borla, the $600 cutout.
SSRA (Supersucker ram kit) While your track times may improve but .1-.2 I do not see you showing any power gain. No change - 300rwhp
SLP Lidfinally! a mod! figure a gain - 308rwhp
Holley Air filtercotton gauze filter media more restrictive, figure a loss - 305rwhp
How much power do you think i will be running ? Approx 1/4 times ? Can I get into the 12's with that ?
BTW i have a 2000 Z28. Question: SSRA is another option for the CAI, right ? Meaning that i only can i one or the other, correct ? Yes. I dont see the term "CAI" used on the LS1 as I did for the LT1 though.Thanks : )
Heres what i plan to get in the next few months:
2000 Z28 lets assume a stock car pulling 295rwhp
Cutout with electrical switchloss of torque, small hp gain - 300rwhp
Borla catback why you would add a cutout to another cutout, I have no idea.. No gain. Borla, the $600 cutout.
SSRA (Supersucker ram kit) While your track times may improve but .1-.2 I do not see you showing any power gain. No change - 300rwhp
SLP Lidfinally! a mod! figure a gain - 308rwhp
Holley Air filtercotton gauze filter media more restrictive, figure a loss - 305rwhp
How much power do you think i will be running ? Approx 1/4 times ? Can I get into the 12's with that ?
BTW i have a 2000 Z28. Question: SSRA is another option for the CAI, right ? Meaning that i only can i one or the other, correct ? Yes. I dont see the term "CAI" used on the LS1 as I did for the LT1 though.Thanks : )
i've got a 02 z28 with borla, lid, k&n, and ssra. i pulled 328 rwhp, 342 rwtq on a dyno. and i'm guessing you might be placing the electric cutout where the borla catback has its built-in cutout so you can open or close that side of the exhaust....? if you do that, that's cool...of course placing it there won't give you more power. just a little less when you close it. if you place it somewhere else, well that's a different story.
i've gone to the track only once, only ran twice.
-street tires
-not so great clutch
-not so great launch
-second (better) run
13.52 @ 106.7
hope that might give you a little ballpark as to what you might expect from your car. of course my car has the ls6 intake since it's an '02....but hope all that helps you.
i've gone to the track only once, only ran twice.
-street tires
-not so great clutch
-not so great launch
-second (better) run
13.52 @ 106.7
hope that might give you a little ballpark as to what you might expect from your car. of course my car has the ls6 intake since it's an '02....but hope all that helps you.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
cmsmith
2016+ Camaro News, Sightings, Pictures, and General Discussion
2
Apr 11, 2015 09:37 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 1, 2014 08:08 AM



