Has anyone ever tried creating an LS1 in DD2000? It is very hard. If anyone knows head flow numbers it would help out a lot. I input 202/208 (roundabout) and .500/.500 for the cam but there is no LSA? There is LCA (Lobe Center Angle), is that the same thing with a different name? I put 115 there. Also what is the intake centerline on these cams?

Trying to build an LS1!

------------------
1983 Monte Carlo, 307 Stroker, TH350, 3.73 10-Bolt - SOLD 8/19/02

Future F-Body Owner

[This message has been edited by BlackHawk T/A (edited August 21, 2002).]

 

This link is to another brand of desktop dyno and dragstrip. They are a free download and are awesome at the amount of info contained in them and what you can input. There is one LS1 modeled on the dyno, it is a 97. But it will give you all the flows, measurements, and specs a clever person would need to model their year LS1 and on to a modded LS1. When you are done with your engine you can model your car on the dragstrip program, afterwards the programs merge and tell you what your car runs (in the cyber world of course).

http://www.themustangshop.com/downloads.cfm

I think I'll post a new thread on this too so anyone who's interested can get the download.
Dave

------------------

• Dynomouth Exhaust!
• My 98...318 rwhp/334 ft lbs
• Mesh Grille
• 71-74 Emblems
• Clear Corners
• My New Home Page
• mn55927@citlink.net

[This message has been edited by ratio411 (edited August 21, 2002).]

 

Awesome, this is exactly what I needed!

------------------
1983 Monte Carlo, 307 Stroker, TH350, 3.73 10-Bolt - SOLD 8/19/02

Future F-Body Owner