Bill'sWS6

What can trigger the check gauges light on the dash to come on? They all seen to be working fine.

Any help would be appreciated.

Thanks,

Bill

NEWBIE T/A

Low fuel, low oil , low volts, high temp - ?

Other than that - a short, or a poor contact, perhaps ?

The gauge cluster just plugs into the wiring connector, and I it has 4 screws that hold it in place.

( Been a while since I had mine out ! )

At any rate, if that contatc was loose - perhaps due to a loose screw - I could see where that might affect it.


Good Luck !

Britt