How in the heck do I do this? I'm really at a loss on this one! I've already cracked the piece of dash that extends from the windshield back and is attached by velcro. I'm beginning to wonder if it would be easiest to just tear the cover off to expose the old airbag and try to glue back on once I get the new one in. Oh yeah, I should probably mention this is in a 95 camaro. Any ideas would be greatly appreciated.. I'm about to give up...

 

i think you have to pull the whole dash out.

 

F me! I was afraid you'd say that. I think I've almost got it out now, seems to be hung up on something in the middle on the bottom....

 

Almost got the dash out that is..

 

There should be a bracket on the bottom of the dash that bolts to the floor. If thats not it the AC ducting could be holding it in. I had to break the ducting to get it out. There is a bolt that holds it in but i couldn't find a way to get it out with out breaking the ducting.

 

Yeah, there is a little bracket below the stereo and behind the little storage bin there... I couldnt see how to get to the bolt either... I'll check it out a little more