General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

Ouch! What to look at after impact...

Old Apr 26, 2004 | 07:40 PM
  #1  
Teal96TA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 93
From: Midland, TX
Unhappy Ouch! What to look at after impact...

Hey all, I was driving yesterday and hit something that threw me into a skid. I managed to avoid hitting the curb sideways or with the front, but hit the rear driver's side wheel almost sideways. My wife looked for me and said every time I hit a bump, with my donut on, it looks like my rear end "wobbles" (for lack of a better term). Also, my exhaust is never really sitting still like it should. I figure the rearend is somehow damaged since when leaving from a stop there was a wierd sound coming from the rear of the car. Not a "clunk" or a "grind" but kind of in between. Need ideas what to look at that might need attention/replacement.
Old Apr 26, 2004 | 11:59 PM
  #2  
OBE1 95Z28's Avatar
Registered User
 
Joined: Dec 1969
Posts: 4,950
From: San Diego, CA
I'd suggest you have an F-Body friend drop by and compare the 2 side by side. Things to look for would be bent LCA and LCA mounting points, bent PHR and mounting points, bent axle (does the wheel spin "true"), inspect your rotor and brake caliper and is your spring and shock tweaked?
Old Apr 27, 2004 | 09:27 PM
  #3  
Teal96TA's Avatar
Thread Starter
Registered User
 
Joined: Sep 2003
Posts: 93
From: Midland, TX
Looks to me like the LCA is tweaked. Shock and spring "seem" straight and with a donut on I didn't see any side to side wheel movement with the car in the air and turning the wheels. It does look like the passenger wheel is about 14" - 1/2" farther out of the wheel-well than the driver's side. Anything else to look for? inner and outer rockers are bad, making the door not close correctly. Broke the plastic panel that covers the canister in the fender. Sounds like the brake pads are dragging on the rotor, the rotor also has a part that appears to have been scraped or something similar. Anything else I can look at?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ultra_Dog
LT1 Based Engine Tech
7
Apr 12, 2005 03:20 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:06 PM.