M6 Owners >> your car creep?
M6 Owners >> your car creep?
okay, just curious if this is normal and if not what is wrong.
if im at almost a dead stop, (like 1 or 2 mph) and gently let of clutch my car will idle at 1k and slowly creep forward just like an auto does. every other manual ive driven would stall if i did this.
this normal with our cars, or do i have clutch problems. its done it since ive owned it
if im at almost a dead stop, (like 1 or 2 mph) and gently let of clutch my car will idle at 1k and slowly creep forward just like an auto does. every other manual ive driven would stall if i did this.
this normal with our cars, or do i have clutch problems. its done it since ive owned it
Re: M6 Owners >> your car creep?
i can do it in my celica as well. its just the way the manual tranny works, the clutch plate grabs the engine and speeds the tranny up so there is no grinding. so what u are doing is just gettin the tranny up to speed and slowly takin off....
Re: M6 Owners >> your car creep?
Originally Posted by Kataklysm
Every manual I've driven does it. As long as you don't let it out all the way...
Re: M6 Owners >> your car creep?
sweet_ ya i live in rochester ny right now and have to do it with traffic. first car though ive been able to let clutch out fully without it stalling.
thankx guys
thankx guys
Re: M6 Owners >> your car creep?
My LT1 wouls idle in all of the gears. I could let off the clutch from a dead stop very slowly and it would idle in 1st then I could shift from 1-2, 2-3, 3-4, 4-5, 5-6. You just gotta give it enough time to for it to pull itself back to 1000rpms. I would idle in 6th @ 35ish mph.
Re: M6 Owners >> your car creep?
Originally Posted by Pandamonkey
Yes, all manuals will creep.........nature of things.
Re: M6 Owners >> your car creep?
Originally Posted by jadedst
i can do it in my celica as well. its just the way the manual tranny works, the clutch plate grabs the engine and speeds the tranny up so there is no grinding. so what u are doing is just gettin the tranny up to speed and slowly takin off....
Thread
Thread Starter
Forum
Replies
Last Post
11racing
Classic Engine Tech
0
Dec 26, 2014 05:40 PM
fpete1992
General 1967-2002 F-Body Tech
1
Dec 11, 2014 03:51 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM



