General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

it finally happened...

Thread Tools
 
Search this Thread
 
Old Jan 24, 2006 | 10:19 PM
  #1  
camaroz99b's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 64
From: Prospect Hts, IL
it finally happened...

well i was driving around campus today and it happened. the window motor on the driver side went out. i read on here that they are crap and i was expecting it to stop working but my car only has 25,000 miles on it so i thought i had a little more time... oh well. so i was wondering what motors you guys recomend getting... thanx
Old Jan 24, 2006 | 10:27 PM
  #2  
00cls1camaross's Avatar
Registered User
 
Joined: Jun 2005
Posts: 655
From: Scottsdale, AZ
Re: it finally happened...

Ebay window motors are decent, i wish they did sell high performance window motors i would deffinatly buy those... i know a guy who bought them off ebay and they are still working 10k later
Old Jan 24, 2006 | 11:53 PM
  #3  
94Z28WP's Avatar
Registered User
 
Joined: Mar 2004
Posts: 461
From: Richmond, Va
Re: it finally happened...

I have an ebay motor in the pass side and a new ACI motor from Advance in the drivers... The ebay motor is still working, the one from Advance costs double but it's stronger and has a lifetime warranty.
Old Jan 25, 2006 | 03:27 PM
  #4  
camaroz99b's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 64
From: Prospect Hts, IL
Re: it finally happened...

thanx for the replies. is the motor riveted on?
Old Jan 25, 2006 | 03:46 PM
  #5  
2001NBMZ28's Avatar
Registered User
 
Joined: Jul 2001
Posts: 1,655
From: Jacksonville, FL
Re: it finally happened...

It's riveted on, unless it's been changed before. New motors come with three small bolts/nuts. Not too hard to change them, I used shoebox's guide at http://shbox.com/page/windowmotor.html Get a motor from a local parts store with a lifetime warranty - and never pay for one again.
Old Jan 25, 2006 | 03:54 PM
  #6  
Blue89Bird's Avatar
Registered User
 
Joined: Jun 2000
Posts: 2,413
From: Marlton NJ
Re: it finally happened...

get one from autozone or anywhere local with a lifetime warranty, so when it goes again you can get a new one withotu shipping it. Also, the first time is the hardest, once its removed and bolted instead of rivited, its a 15 min job, check out shoebox's site, best on the net
Old Jan 25, 2006 | 07:00 PM
  #7  
slayer6x6's Avatar
Registered User
 
Joined: Oct 2002
Posts: 1,867
From: Drexel Hill, Pa
Re: it finally happened...

Mines at 40K and still going strong!

:knock on wood:
Old Jan 25, 2006 | 07:19 PM
  #8  
2001NBMZ28's Avatar
Registered User
 
Joined: Jul 2001
Posts: 1,655
From: Jacksonville, FL
Re: it finally happened...

Knock on wood is right, my passenger side bit the dust just after 3 years, and I only have 23K on the car now.
Old Jan 25, 2006 | 10:33 PM
  #9  
brad02somss's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1
From: Carrollton, Il
Re: it finally happened...

In my old Camaro I blew out the Drivers Side and got one from Autozone. 40 Bucks and Lifetiem Warranty, cant beat it in my opinion.
Old Jan 26, 2006 | 12:46 AM
  #10  
camaroz99b's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 64
From: Prospect Hts, IL
Re: it finally happened...

alright thanx guys. i appreciate all the advice.
Old Jan 26, 2006 | 10:33 AM
  #11  
mikerulzu's Avatar
Registered User
 
Joined: Nov 2005
Posts: 74
From: SF, CA
Re: it finally happened...

For window motors, I feel the only real factors are how often you used them, and how long they've been in, not how many miles the car has.

Fortunately, I haven't had to replace either of mine yet, an 02 Z28.
Old Jan 26, 2006 | 10:59 AM
  #12  
phoenixonfire's Avatar
Registered User
 
Joined: Apr 2005
Posts: 5
From: UCF Area - Orlando, FL
Re: it finally happened...

I've had to replace my driver-side window. I wound up checking out sites like: http://www.trademotion.com/partlocat...61&catalogid=0

I think my passenger-side window is starting to go. :\
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
magman
LT1 Based Engine Tech
7
Apr 15, 2016 03:08 AM
PopoFormula
LT1 Based Engine Tech
5
Oct 12, 2015 04:19 PM
9t4lt4z28
LT1 Based Engine Tech
1
Oct 2, 2015 10:28 AM
Ks0209
LT1 Based Engine Tech
10
Oct 1, 2015 07:32 AM
kandied91z
Midwest
0
Sep 30, 2015 11:43 PM




All times are GMT -5. The time now is 04:40 AM.