Can't get the staple all the way back into the A4 shifter
Thread Starter
Registered User
Joined: Dec 2003
Posts: 1,457
From: Seattle, Washington
Can't get the staple all the way back into the A4 shifter
I'm using a hammer and I can only get it about 7/8 of the way in, but it's still showing and you can DEFINATELY feel it when you put your hand on the shifter. Do I need to pop it back out and do this over?
Registered User
Joined: Mar 2004
Posts: 461
From: Richmond, Va
Re: Can't get the staple all the way back into the A4 shifter
You should be able to press it in with your finger... If you pull up and remove the shift ****, you'll see the groove the "staple" slips into... It's just a matter of getting it lined up with that slot.
Thread Starter
Registered User
Joined: Dec 2003
Posts: 1,457
From: Seattle, Washington
Re: Can't get the staple all the way back into the A4 shifter
Cool, I got it in, the opposing angles of it made it difficult at the start as it was too wide... I used some pliers and bent in inward just alittle and it popped in and stayed like a charm...
... Unfortunately in process of removing it I slightly scar'd my leather boot
Any remedy for that or is this permanant?
... Unfortunately in process of removing it I slightly scar'd my leather boot
Any remedy for that or is this permanant?
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM