I have a 1996 Camaro with a Vortech YS Trim supercharger. I am trying to find a better way to route the induction hose that goes from my air filter to the backside of the blower.

Is there anything aluminum made for this? Does anyone have any pictures of how they have done it?

I found yesterday that the hose was bound around my steering shaft all caught up. No air could get through it, none!

I was just curious if anyone could shed some light on the situation and possibly help me come up with a better way of doing this.

Thanks!

Wes Buck

 

Here's a link to the 4" inlet tube I just had made:
inlettube.jpg

It cost a fortune, but it fits perfectly.

 

Didn't Brad Brand from ACD used to make a solid tube for a Vortech blower? I don't remember if it was for an S-trim or a T-trim and if it'd even work with a YS-trim. Might be something to check into. I know there isn't much clearance with my ATI to run a solid pipe out the back.

 

No doubt!

This is a pain in the ***.

What really bugs me the most is, so far...there is no "nice" way to do it. I hate gom-****ed bull****, I hate it. I'll just let the ****er sit till I can figure out a real **** way to do it. Suns a bitches.

This aluminum pipe deal is kickass, I am going to try and go that route. I'll look into the Brad Brand deal though.

Thanks for your help,
Wes

 

I'm definately interested.

I'll shoot you an email.

Thanks,
Wes