those who made your own log style headers
#2
Re: those who made your own log style headers
you can get the t pipes and the 90 degree radius pipes from www.mcmaster.com. They have mild and stainless steel. Just search for like weld els or stainless pipe and you should be able to find them.
#5
Re: those who made your own log style headers
Gotta have some smallish pipe like 1 5/8 pipes to weld onto the header flange or the shortpipes on the header flange to connect to the log. Ill basically have to do more research as far as sizing of all the hotside parts, just curious if there is a certain gauge like 16 gauge that the pipes and log etc should be made of... and whaere some of you get it from.
#6
Re: those who made your own log style headers
Originally Posted by lt4 fd
Just wondering where you...?
#9
Re: those who made your own log style headers
I'd have to go back and look, but my main log is some thick ****...14ga. maybe? The primaries are 1-3/4" u & j-bends that I got from a local place. They work perfect.
#10
Re: those who made your own log style headers
Originally Posted by texlurch
Sch40 should be about 1/8" thick wall, maybe a bit more.
I saw a how-to on one of the Honda sites a while back....
How 'bout this one? http://www.sdsefi.com/techheader.htm
#14
Re: those who made your own log style headers
well heres one I built
http://webpages.charter.net/clownhair/manifold4.jpg
http://webpages.charter.net/clownhair/manifold4.jpg
#15
Re: those who made your own log style headers
clownhair, are the 2 center primaries actuallt "T" pipes and the outside primaries just close them off? also what size is the main log, looks the same as the primaries..?