Speed Inc. shop car video
Thread Starter
Registered User
Joined: Jan 1999
Posts: 884
From: I reached back like a pimp and smacked that LS1....
Speed Inc. shop car video
We took our shop car out to Great Lakes Dragaway last night and made a few runs.
Traction was a problem all night, tires are 28x11.5 et drags.
Dan Marks (whom also works at Speed) was driving. The car made 8 low 9 sec runs.
The best timeslip was-
60ft 1.426
1/8 5.968
1/8 mph 120.61
1/4 9.233
1/4 mph 150.50
This was leaving off the transbrake/2-step at 3,670 and 10lbs of boost.
The basic setup is our 370ci iron motor with out of the box AFR 225's, 236/242 112lsa cam (yes, that's correct), Innovative mid-frame 88mm turbo, T400 with neal chance converter, Currie 9in with 3.5 gears.
Tune up was 21lbs of boost, 22deg total timing, 11-1 a/f, and all runs made through the entire 4in exhaust and magnaflow muffler.
We'll probably play around with the suspension to try and get the 60ft's into the 1.3x range.
http://www.ls1speed.com/movies/shopcar9_2.WMV
Traction was a problem all night, tires are 28x11.5 et drags.
Dan Marks (whom also works at Speed) was driving. The car made 8 low 9 sec runs.
The best timeslip was-
60ft 1.426
1/8 5.968
1/8 mph 120.61
1/4 9.233
1/4 mph 150.50
This was leaving off the transbrake/2-step at 3,670 and 10lbs of boost.
The basic setup is our 370ci iron motor with out of the box AFR 225's, 236/242 112lsa cam (yes, that's correct), Innovative mid-frame 88mm turbo, T400 with neal chance converter, Currie 9in with 3.5 gears.
Tune up was 21lbs of boost, 22deg total timing, 11-1 a/f, and all runs made through the entire 4in exhaust and magnaflow muffler.
We'll probably play around with the suspension to try and get the 60ft's into the 1.3x range.
http://www.ls1speed.com/movies/shopcar9_2.WMV
Thread
Thread Starter
Forum
Replies
Last Post