selling my twin turbo kit for $1000
#1
selling my twin turbo kit for $1000
http://memimage.cardomain.net/member...76_12_full.jpg
http://memimage.cardomain.net/member...76_47_full.jpg
http://memimage.cardomain.net/member...76_96_full.jpg
Trying to sell this kit asap so that's why price is low. Want to get a no hassel sale. These pictures have been taken last summer. All piping have some rust on them since they are mild steel. I highly reccomend ceramic coating. Not sure if this will fit an F-body but it'd be real close. Headers are hugging the valve covers pretty good so it's very possible it will be a direct fit. Some of the bolts won't go into the header flanges so some work needs to be done there. Overall for $1000, you're getting a hell of a deal!!!
Here's what the whole package comes with
*Headers- aluminized mild steel
*dp- passenger side goes strait back, driver side goes under the oil pan and meets up to the driver's side with a y-pipe. Has V-band connections
*2 TO4B turbos
*Oil feed lines (2 total)
*Oil drain lines (2 total)
*Oil feed and drain fittings
*All IC pipings which probably won't work with an F-body, but it's yours. The TB elbow I'm going to keep
The FMIC I'll sell for an additional $300. It has dual 2.5" inlets and a single 3" out.
Again, I'm trying to get a quick sale. Can ship within 1-3 days after I get payment
http://memimage.cardomain.net/member...76_47_full.jpg
http://memimage.cardomain.net/member...76_96_full.jpg
Trying to sell this kit asap so that's why price is low. Want to get a no hassel sale. These pictures have been taken last summer. All piping have some rust on them since they are mild steel. I highly reccomend ceramic coating. Not sure if this will fit an F-body but it'd be real close. Headers are hugging the valve covers pretty good so it's very possible it will be a direct fit. Some of the bolts won't go into the header flanges so some work needs to be done there. Overall for $1000, you're getting a hell of a deal!!!
Here's what the whole package comes with
*Headers- aluminized mild steel
*dp- passenger side goes strait back, driver side goes under the oil pan and meets up to the driver's side with a y-pipe. Has V-band connections
*2 TO4B turbos
*Oil feed lines (2 total)
*Oil drain lines (2 total)
*Oil feed and drain fittings
*All IC pipings which probably won't work with an F-body, but it's yours. The TB elbow I'm going to keep
The FMIC I'll sell for an additional $300. It has dual 2.5" inlets and a single 3" out.
Again, I'm trying to get a quick sale. Can ship within 1-3 days after I get payment
#4
Re: selling my twin turbo kit for $1000
Don't know if it will bolt up to your stock car. If you wanted the car to be stock but just add the turbo kit, probably not. You're gonna have to do some mods to get this to work.
IC core is 20x10x3 tube and fine. Twin 2.5" on one side. Single 3" outlet
http://memimage.cardomain.net/member...76_14_full.jpg
IC core is 20x10x3 tube and fine. Twin 2.5" on one side. Single 3" outlet
http://memimage.cardomain.net/member...76_14_full.jpg
#6
Re: selling my twin turbo kit for $1000
ahh, nevermind, not what im looking for...thanks though
Originally Posted by LT1RX7
Don't know if it will bolt up to your stock car. If you wanted the car to be stock but just add the turbo kit, probably not. You're gonna have to do some mods to get this to work.
IC core is 20x10x3 tube and fine. Twin 2.5" on one side. Single 3" outlet
http://memimage.cardomain.net/member...76_14_full.jpg
IC core is 20x10x3 tube and fine. Twin 2.5" on one side. Single 3" outlet
http://memimage.cardomain.net/member...76_14_full.jpg
#13
Re: selling my twin turbo kit for $1000
I wish I would have known this about a month ago. I purchased a Vortech for the Z28... I'm building a first gen twin turbo RX and this would have been perfect, but I have no money now
-Shannon
-Shannon