Say Goodby
Last night was the last night for me and the ol TA.
Big Mike did great...congrats Mike and the rest.
Thanks for the words of encouragement Ken
Thanks to all fbody and non-fbody people there making it feel like old times.
P.S. We need more hot chicks though..I think that my wife was the only one there.
First run high 10's 140 MPH with and awful 1.8 60'...vibe at end of track so I let off... (1/8th mile was 110MPH)
Second run high 10's 137 MPH backed off at end of track. 1.6 60' (1/8th was 109) MPH
data log shows 183 deg IAT at 16 psi... I left from the foot break and did not use the boost builder or launch control. I think I bent the DS.
MPH is great, lag bad, pulls like a b1tch at the 60' and on. Feels great after boost...but the engine needs to come apart. The blue car will be out next spring with new turbo. I am going to send this one back for a lighter wheel and smaller hot side AR.
P.S. I don't want a dyno queen...I want to run Things can look great on the dyno, and suck at the track.
Wingnut
Big Mike did great...congrats Mike and the rest.
Thanks for the words of encouragement Ken
Thanks to all fbody and non-fbody people there making it feel like old times.
P.S. We need more hot chicks though..I think that my wife was the only one there.
First run high 10's 140 MPH with and awful 1.8 60'...vibe at end of track so I let off... (1/8th mile was 110MPH)
Second run high 10's 137 MPH backed off at end of track. 1.6 60' (1/8th was 109) MPH
data log shows 183 deg IAT at 16 psi... I left from the foot break and did not use the boost builder or launch control. I think I bent the DS.
MPH is great, lag bad, pulls like a b1tch at the 60' and on. Feels great after boost...but the engine needs to come apart. The blue car will be out next spring with new turbo. I am going to send this one back for a lighter wheel and smaller hot side AR.
P.S. I don't want a dyno queen...I want to run Things can look great on the dyno, and suck at the track.
Wingnut
Thread
Thread Starter
Forum
Replies
Last Post
95redLT1
Automotive News / Industry / Future Vehicle Discussion
25
Sep 8, 2010 08:27 PM



