purpose of using multiple ByPass valves
purpose of using multiple ByPass valves
Registered User
Joined: Dec 2003
Posts: 13
From: Pearland,TX.
It is for people running a large amount of boost these bypass valves only flow so much and sometimes it will take two or more to relieve the presure on deceleration. Not many people need this though.
Thread Starter
Registered User
Joined: Oct 2000
Posts: 1,430
From: western, Massachusetts
>Thanks for the reply .
I have a 396 w/ T-trim and I am using pullies that a guy with a 383 was seeing 15+ pounds of pressure (I figure that I will see less) I am using the Bypass valve that came with the kit , but I also have a (Vortech) Mondo valve that I can't figure out where to place
.
I have a 396 w/ T-trim and I am using pullies that a guy with a 383 was seeing 15+ pounds of pressure (I figure that I will see less) I am using the Bypass valve that came with the kit , but I also have a (Vortech) Mondo valve that I can't figure out where to place
.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
Jan 27, 2015 06:27 AM
