Project Turb Hoe
Project Turb Hoe
North American Telecom Systems and Tech demo truck engine build-up.
Project Turb Hoe
STS Turbo kit at 11psi
Bored 126 mil over
forged aluminum LS1 Turbocharged pistons by Wiseco, -32cc dished
forged Eagle I beam rods
forged Eagle stroker crank
383 cu in
ported oil pump
8.4:1 CR
(Hopefully 500 RWHP)
Check back often, will update as progress continues.
Project Turb Hoe
STS Turbo kit at 11psi
Bored 126 mil over
forged aluminum LS1 Turbocharged pistons by Wiseco, -32cc dished
forged Eagle I beam rods
forged Eagle stroker crank
383 cu in
ported oil pump
8.4:1 CR
(Hopefully 500 RWHP)
Check back often, will update as progress continues.
Re: Project Turb Hoe
Sorry, the server gets busy sometimes.
Just added a few more though.
Got the bottom end from the balancer. Crank looks like swiss cheese now, but it's balanced. Took a lil off the rods. *pics*
Assembly of the shortblock was completed today. Engine will be done tmr, i hope. *pics*
17 new pictures added
Just added a few more though.
Got the bottom end from the balancer. Crank looks like swiss cheese now, but it's balanced. Took a lil off the rods. *pics*
Assembly of the shortblock was completed today. Engine will be done tmr, i hope. *pics*
17 new pictures added
Re: Project Turb Hoe
Long block's done today. Yay! 
Color matched the block. Gotta look good while going fast!
Cometic gaskets, decked the heads, sandblasted, repainted and polished, rebuild valves and rollers.
32 pics uploaded today.
Going back in the truck tommorow.

Color matched the block. Gotta look good while going fast!
Cometic gaskets, decked the heads, sandblasted, repainted and polished, rebuild valves and rollers.
32 pics uploaded today.
Going back in the truck tommorow.
Thread
Thread Starter
Forum
Replies
Last Post



