i have a used STS ls1 kit with the pipes bent for an intercooler. i put the FMIC in and started working on getting the pipes together. passenger side is all together. drivers side i have a problem. the LS1 kit moves the maf sensor farther down and were the pipe runs the cruise control is in the way. i really dont want to move the maf sensor or move the cruise control, so i was gonna use the stock elbow, and put the intake tube from the kit were the cai goes down under the car. would this be a problem? im really starting to think i bit off more then i can chew with this project. any help would be great thanx

 

 

all youve got to do is get some silicone couplers that are the size you need, and maybe cut a little bit of intake pipe and fit it where you need. and if you dont want to mess with wires.....just get this http://www.fullthrottlespeed.com/ite...T6~eq~~Tp~.htm

depending on how much room you have it maybe easy to move the cruise a little. i had to do it for the vortech kit.

maybe this helps.
jeremy

 

ya making the maf sensor work in the stock place may not be that hard. im gonna see if i can find someone to give me a hand setting up the kit the way it was supposed to be set up.