Whats up guys? Just wanted to share some info & pictures of my current turbo project. It is a 94 TA with a stock bottom end, and I am bolting on a T70 turbo. The exhaust kit is from Pro Turbo and I must say after the 6 month wait it is quality stuff. I am still waiting on some parts....Jose please help!!!..... but the car is coming along nicely. The headers bolted up PERFECT and dropped in from the top with no motor mount tom-foolery. I hope to have it running soon....
then blow it up......and then forge the motor . Tell me what you guys think.

http://www.cardomain.com/memberpage/366815/5

Please work.....hehe

 

Pics not working.

 

Damn I need to get you the oil lines asap. I get wrapped up here with the dang phones, and end up not hassling Dalton...hehe. I will see what I can get you by this weekend. Also I will be in ATL this weekend for the Ford shootout, so I may give you a ring.

Jose

 

Jose - It'd be alot cooler if you did....feel free to drop me a line, you got my #?

Pics work?

 

Pics not working.. get em up and running man.. wanna see that chit!

Chris

 

Nice quality stuff. It almost makes me wish I'd waited for PTK to get their act together so I hadn't had to build my own.

-Chris

 

Damn car domain.....ill have the pics up today...sorry

 

Adam, if you want send them to us on the e-mail address, we can host them for you...

Jose

 

Think I got it...see first post....Jose host me some parts

 

Hello again, yesterday we accomplished a good bit on the install. The steering arm was hitting primary #3 so I had to take a hammer to my new headers...
After that we installed the crossover pipe which went well but the pipe that goes through the k-member from the crossover needed modification (ie hammer). Then we installed the pipe with the turbo flange and now I have a t70 hanging off the front!!!! Clearance and install wasn't that bad but I have yet to do the downpipe. More to come.... later

http://www.cardomain.com/memberpage/366815/5
new pics at end...

 

I was talking to Dalton and we need to get some pics of the clearence problem. Its strange, all the other Gen 2 kits we have sold we have not had any clearence problems to date. With the Gen 1 we only had one clearence problem and that was the first kit which was on my personal car since I was the first car. We have had this issue before on 2 or 3 mustangs, but it was due to sagging motor mounts. Get me some pics and see if we can look at doing some changes.

Jose

 

BTW, Dalton is getting together your fittings and should ship out monday. I spoke to him late friday afternoon.

Jose

 

Nice!!

 

Whats the difference between the gen1 and gen2 kits?

 

Sup guys & gals, I finally installed all the hot side. I started the car for about 15 seconds to hear the new turbo exhaust.... I filmed some video and took some new pics but I can't host video.

Progress 4/24/05

I would of started it and warmed it up but I still have no F'in oil lines...or radiator fans.
Anyone know a fan setup that is ~2 in deep?

I should have the cold side done as soon as I get the fans taken care of this week. More to come.....i can't wait hehe


97z28/m6- The gen 1 kit was totally different design. Try forcedinductions.com for some pictures of the first gen kit.