intercooler piping
Registered User
Joined: Mar 2000
Posts: 520
From: Bellingham, WA, USA
How big of turbo or turbos, level of boost? How much hp are you wanting total? Alum tubing is fine (are you meaning aluminized tubing? The only prob with it is i would think it would rust eventually.
steven
steven
Registered User
Joined: Feb 2002
Posts: 702
From: Houston, TX USA
I used aluminized exhaust tubing. If you could find aluminum pipe and bends, and IF you could weld it, that would be the way to go. A lot lighter.
Sizing .. I sized mine to match the inlet/outlets of the turbos, and intercoolers.. keep in mind the TB on an LT1 is around 4", so you will have to get it to that size at the end.
You can paint the outside, what about the inside? There will be some condensation.. I plan to get mine ceramic coated when the ol' pocketbook allows! Inside and out. A side benefit will be to keep the engine heat away..
Sizing .. I sized mine to match the inlet/outlets of the turbos, and intercoolers.. keep in mind the TB on an LT1 is around 4", so you will have to get it to that size at the end.
You can paint the outside, what about the inside? There will be some condensation.. I plan to get mine ceramic coated when the ol' pocketbook allows! Inside and out. A side benefit will be to keep the engine heat away..
Thread
Thread Starter
Forum
Replies
Last Post