does anyone have pictures of were and how they mounted your intercooler.
thanks

 

do a search for fmic

 

I what you said and it says no match found.

 

Link in sig.

 

I was thinking something like that but mine is liquid to air and is pretty big. I'm thinking it will be best to place under front facia and remove the bumper guts.

 

http://home.koping.net/u3243a/vinter...5/DSC02020.JPG

 

I'm thinking thats how it's gonna be.

 

LIsa, did you have to modify your front clip at all?

 

Front clip? not sure what you mean.
But if its the black plastic above the IC the answer is yes, i did grind it down a little to get the Ic a bit higher.
Ake.e

 

Mine is in the same spot as Lisa's albeit in a different generation.

 

by front clip i mean just the front body piece. I have the same intercooler and didnt think there was any way i could get it to sit strait up and down. My origional intention was to angle it back a little and still have to cut a bit of the clip away underneath.

 

Ahhha, didnt modify the front clip in anyway, it sits aprox 1" lower now so i couldnt use the stock fasteners any more, I just strap it upp widh 3 "tie wraps"

 

do you have any pictures with the front clip mounted up, like from underneath?

 

 

isnt really much to see
http://home.koping.net/u3243a/tillfalliga/under.JPG