Hose question...
Thread Starter
3rd Gen Tech Moderator
Joined: Sep 1998
Posts: 564
From: Buffalo, NY USA
Hose question...
Ok, here's the deal:
I bought some temp hoses to hook my 3.5" MAF to my 3 inch pipes. I was going to put a 3.5 hose over a 3" hose so it would fit snug on the piping.
First off- Will this create problems seeing as it goes from large to small to large to small? It will probably create a restriction, huh?
I can't find 3 to 3.5 rubber reducers to save my life. Any help is appreciated.
Steve
I bought some temp hoses to hook my 3.5" MAF to my 3 inch pipes. I was going to put a 3.5 hose over a 3" hose so it would fit snug on the piping.
First off- Will this create problems seeing as it goes from large to small to large to small? It will probably create a restriction, huh?
I can't find 3 to 3.5 rubber reducers to save my life. Any help is appreciated.
Steve
Registered User
Joined: Apr 1999
Posts: 2,784
From: Rochester Hills, MI
You may want to try www.hosenow.com 
Registered User
Joined: Apr 1999
Posts: 1,178
From: Cleveland, WI
http://shop.airflowonline.com/Mercha...tegory_Code=HH
Its about halfway down the page. Its a hump hose though, but its only 8 bucks. You can also email them if you don't see what you want, they have everything odd you can think of.
Its about halfway down the page. Its a hump hose though, but its only 8 bucks. You can also email them if you don't see what you want, they have everything odd you can think of.
Last edited by SMOKNZ; Aug 20, 2003 at 05:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post