FS: Forged Rotating Assembly
FS: Forged Rotating Assembly
Callies 4340 Racemaster (stealth) 3.75" one piece seal crank. This crank is BRAND NEW in the box. Only took it out for inspection. It sells for around 1200.00, I'll let it go for 950.00 and it's perfect....
Oliver 5.85" Billet Connecting Rods. These rods have less than 3 hours of dyno time and are absolutely perfect, in the original box. They sell for around 1200.00 new.... <See pistons below for pricing>
Wiseco Custom -20cc, .030" over, dished blower pistons with pins and locks, BRAND NEW in the box. Beautiful,,,, for use with 3.75" stroke and 5.85" rods, and have a 1.28" compression height. I will only sell these in combination with the rods. Selling both the rods and pistons for 1100.00. That's like getting a free set of pistons.... Pistons yield about 9.3:1 with 58cc heads, or 8.7:1 with 64cc (like AFR's).
Callies Splayed Main Caps for converting a 2 bolt block BRAND NEW in the box. These sell for 250.00 new, I'll let them go for 200.00.
I have pics available to serious buyers.
Buy the whole rotating assembly and I'll take off 100.00.
Let me know if you have any questions. Accepting reasonable offers but I think the prices are more than fair so low-ballers need not apply.
Email: bowtie97@attbi.com
Mike
Oliver 5.85" Billet Connecting Rods. These rods have less than 3 hours of dyno time and are absolutely perfect, in the original box. They sell for around 1200.00 new.... <See pistons below for pricing>
Wiseco Custom -20cc, .030" over, dished blower pistons with pins and locks, BRAND NEW in the box. Beautiful,,,, for use with 3.75" stroke and 5.85" rods, and have a 1.28" compression height. I will only sell these in combination with the rods. Selling both the rods and pistons for 1100.00. That's like getting a free set of pistons.... Pistons yield about 9.3:1 with 58cc heads, or 8.7:1 with 64cc (like AFR's).
Callies Splayed Main Caps for converting a 2 bolt block BRAND NEW in the box. These sell for 250.00 new, I'll let them go for 200.00.
I have pics available to serious buyers.
Buy the whole rotating assembly and I'll take off 100.00.
Let me know if you have any questions. Accepting reasonable offers but I think the prices are more than fair so low-ballers need not apply.
Email: bowtie97@attbi.com
Mike
Thread
Thread Starter
Forum
Replies
Last Post



