Well I can only say that we made it to 4700 rpm before the belt got blown off the 3.0 pulley. So I have a 8 rib set up coming from ASP with a 8.5 crank and 4.25 blower 8 rib pulleys.

At 4700 I was at 9 psi, 487.9hp 509.9 tq. Not bad for 4700 rpm's.
Look for new dyno #'s in a few weeks when I get the 8 rib.

 

What is your setup?

 

Do you have any pics of this set-up Nice Numbers

 

Im watching your progress on the ls1tech site as well. Let us know what going on.

 

I am running a 9.2-1 CR 346 with dynotech headers, mufflex exhaust, custon fuel system.F1 procharger, Fast system, T400 tranny, moser 12 bolt 4:10 gears.

pictures and list of mods are on my website. www.scottytoohottie.com

 

I will have the 8 rib set up in a couple weeks because the belt slips so bad now that I burned one right off the car.lol

 

Pretty nice setup. I am currenlty have a similar setup with my Lt1 car. I am running a 383, F1 & Fast system. How high do you plan on spinning the motor?? Do you mind letting me look at your program? Thanks

 

I am spinning the motor to 6800 rpm. I will let you look at the program as soon as its the tune is complete and I have it on the laptop. As of right now julio at cartek has the laptop.

 

Cool, Thanks

 

Those are some nice numbers for only a pull to 4700 RPM!

I am interested to see what you will put down with a full pull