Belt Slip
Thread Starter
Registered User
Joined: Feb 2000
Posts: 509
Belt Slip
Could've sworn I had a leak, tore almost whole intercooler plumbing apart...Belt slipping...
Symptom:
Boost PSI would increase as RPM, but then stop increasing and slightly decrease. Power affected proportionally.
Problem:
Belt slipping on supercharger.
Note:
ATI now recommends a tungsten carbide coating from CarbiniteRacing.com for the pulleys if slippage is a problem:
Symptom:
Boost PSI would increase as RPM, but then stop increasing and slightly decrease. Power affected proportionally.
Problem:
Belt slipping on supercharger.
Note:
ATI now recommends a tungsten carbide coating from CarbiniteRacing.com for the pulleys if slippage is a problem:
Thread
Thread Starter
Forum
Replies
Last Post