Well, finally after a year I got my full exhaust system finished. Just bolt ons but took me for ever to get all the parts and bolt them on. I have flow-tech long tubes, i know-i;m cheap, y-pipe feeding into loudmouth 2 exhaust. Sounds great, especially under full throttle. A little louder than I thought it was going to be but not to bad. I will see after I take a long highway cruise. As for now, I love it.

 

How is the fitment with the flow-techs? I'm sure it is loud with the SLP out back.

 

The fitment of the headers was pretty good. The y-pipe had a little problem with from them, seemed like just wasn't welded at correct angle where meets up with headers but once got it all together it was okay. Loudmouth bolted right up to y-pipe from flowtech, have a small clearance issue at back by cross brace but I am talking very small. Exhaust just touches brace when downshifting and get rev range at about 3000 rpms and am just coasting. I just need to mess around with alignment a little more and should correct the problem. Overall, could of spent a lot more, got nicer products that may of fit perfect right off the bat but these were not bad at all, especially for the money. Under 1000 and got complete exhaust from heads on back done.