T56 swap question
#1
T56 swap question
I have a t56 with a bellhousing and clutch. I believe all i need is pedals, cross member, hydraulic setup, and console top. Is there anything else i will need, i believe the driveshaft is the same but correct me if i'm wrong.
#2
Make sure you get the U-bolt thingy to hold the MC on and the pigtails to wire in the reverse switch and solenoid. Pilot bushing or bearing. You might want to consider high quality bolts for FW and pressure plate. You didn't mention a shifter or lower boot, but that is kind of obvious. Also, good time to do a rear seal if yours is shot.
Thread
Thread Starter
Forum
Replies
Last Post
HectorM52
Parts For Sale
2
01-31-2015 07:29 PM