T56 output shaft question.
How much play should there be from an output shaft in a T56? I just bought a used T56 and there seems to be quite a bit of end play.
TIA |
With no yoke in it there will be some end play. The yoke acts like a rear bearing,(there's a bushing in the tail housing.) Slide your driveshaft in there and see if there's still end play.
|
Sorry, the original trans is still in the car (A4), so I cannot use the driveshaft to see if that will help. I just got the T56 in order to do a conversion. As far as the amount of endplay, I can move the output shaft in and out better than an inch.
|
Ive got 2 T56's I have acces to, both LT1 ans LS1. I will take some measurements. That does sound excessive. I was thinking you were talking left to right end play, not front to back. Ive also got the manual, Ill see what holds it in place. Ill post back this afternoon.
|
I really appreciate the help.
|
Hey man, bad news. Neither one of my t56's have any endplay. Here is the r&r manual from shoeboxes site. http://shbox.com/1/4th_gen_tech2.html#t56 I hope you can work something out with the seller.
|
Thank you for the link.
Weak :( |
Update
Output shaft twisted and snapped completely in half :(
|
Originally Posted by Tex95Z
(Post 5794263)
Output shaft twisted and snapped completely in half :(
|
Originally Posted by Tex95Z
(Post 5794263)
Output shaft twisted and snapped completely in half :(
|
Originally Posted by Green96Z
(Post 5794489)
Ouch, tough break. Now would be a good time to get it built though. :D
|
Hopefully the seller will be cooperative.
|
All times are GMT -5. The time now is 02:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands