I have a 95 chevy s10 that i believe comes stock with a 373 10 rear end. Will these gears work in my 1995 z28 10 bolt rear? The s10 has a sbc in it right now i just plan to sell it and i want to put 373's in the camaro ne way so i figured i could jus swap them. Anyone know if this will work?????

 

is the s10 2wd? if yes, then yes, the gears will work(might need to swap the carriers as well though[series 2/3])


some of the 4x4 s10s got the 8.5, not the 7.5

 

yeah it is a 2wd. I thought it would but didnt want to tear it apart and find out the hard way.How will i know if i need to swap the carrier as well?

 

what gear is it the camaro? what gear in the s10?

 

Whatever came stock in a 95 z28 i believe its a two somethin or another. The s10 has a 373 im pretty sure of.

 

Check your RPO's cause if its a 2 series you will need to swap out the carrier too or use a spacer (which I don't recommend). You would also need to buy a 3 series reluctor ring cause I don't believe the S10's use them on the differential like f-bodys.

 

take the torque converter out as well. it's a 3200 stall and will work wonders in your z/ta...whatever 4l60 ya got.

 

It will help a little but I wouldn't count on it lasting under hard driving conditions. And if it takes a dump it might hurt the tranny too.