CamaroZ28.Com Message Board

Drivetrain Clutch, Torque Converter, Transmission, Driveline, Axles, Rear Ends

Problems pulling the trany

Thread Tools
 
Search this Thread
 
Old Jun 14, 2005 | 10:34 AM
Share
  #1  
Red96Lt1's Avatar
Red96Lt1
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 2,253
From: Birmingham, Al
Problems pulling the trany
It's almost all of the way off of the splines and the bellhousing is hitting the firewall. I've tried jacking up the front of the motor a little, didn't help too much. Any suggestions? Thanks.
Reply
Old Jun 14, 2005 | 10:42 AM
Share
  #2  
madwolf's Avatar
madwolf
Registered User
 
Joined: Jul 2001
Posts: 4,577
From: DeKalb, IL
Re: Problems pulling the trany
Did you try lowering the jack (so that it lowers the tranny and it sits at an angle)? Mine had lots of room and that's with new polyurethane motor mounts.
Reply
Old Jun 14, 2005 | 12:37 PM
Share
  #3  
rngilliland's Avatar
rngilliland
Registered User
 
Joined: Oct 2004
Posts: 536
From: Little Rock, AR
Re: Problems pulling the trany
It sounds like you are taking the trans and bellhousing out together. If so you need to remove the trans from the bellhousing and take the trans out first.
Reply
Old Jun 15, 2005 | 01:52 PM
Share
  #4  
Red96Lt1's Avatar
Red96Lt1
Thread Starter
Registered User
 
Joined: Jun 2003
Posts: 2,253
From: Birmingham, Al
Re: Problems pulling the trany
Yeah, I was pulling it with the bellhousing. Ion, did you pull it with the bellhousing?
Reply
Old Jun 15, 2005 | 06:05 PM
Share
  #5  
madwolf's Avatar
madwolf
Registered User
 
Joined: Jul 2001
Posts: 4,577
From: DeKalb, IL
Re: Problems pulling the trany
Nope, I did it without the bellhousing. That's the way to do it. Same goes for the install.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Power Side Mirrors Not Working (1993)
guruerror
General 1967-2002 F-Body Tech
8
Dec 12, 2020 06:32 PM
95z28 fans stay on at cold start and overheating
Magenta_Hearts
LT1 Based Engine Tech
15
Mar 29, 2017 08:54 PM
New girl with new car and new problems
Magenta_Hearts
New Member Introduction
4
Mar 25, 2015 10:24 AM
vibration throughout the car
karnykamaro
LT1 Based Engine Tech
15
Feb 2, 2015 01:37 PM
C6 Corvette mule spotted!
Darth Xed
Automotive News / Industry / Future Vehicle Discussion
13
Jul 22, 2002 12:45 PM
Back to Subforum
Drivetrain
View Next Unread
how to recognize a shift kit




Advanced Search

All times are GMT -5. The time now is 03:32 AM.