Drivetrain Clutch, Torque Converter, Transmission, Driveline, Axles, Rear Ends

Is this normal from the factory on a T56?

Thread Tools
 
Search this Thread
 
Old Oct 10, 2006 | 08:12 PM
  #1  
mobleman's Avatar
Thread Starter
Registered User
 
Joined: Mar 1999
Posts: 455
From: Syracuse, NY
Is this normal from the factory on a T56?

When I pulled my T56 away from the motor I found that the transmission front seal had been covered with some type of gasket/sealant/rtv...






My question: Is this normal from the factory?

I'm the original owner and didn't do this myself, that leaves either the dealer or a speedshop I used to replace the clutch a few years ago. Either way I wasn't informed that this had been done if its not original.

Can I change out this seal easily? (Wanted to ask first since I really cant see behind the gobbed on rtv) I should note, it was really oily/wet inside the bellhousing and on this face of the transmission when I pulled it apart. Couldn't tell if it was from an oil leak or or a transmission leak.

Last edited by mobleman; Oct 10, 2006 at 08:14 PM.
Old Oct 11, 2006 | 07:54 AM
  #2  
96TurboTA's Avatar
Registered User
 
Joined: May 2003
Posts: 647
From: Brockton, Ma
Re: Is this normal from the factory on a T56?

Originally Posted by mobleman
When I pulled my T56 away from the motor I found that the transmission front seal had been covered with some type of gasket/sealant/rtv...






My question: Is this normal from the factory?

I'm the original owner and didn't do this myself, that leaves either the dealer or a speedshop I used to replace the clutch a few years ago. Either way I wasn't informed that this had been done if its not original.

Can I change out this seal easily? (Wanted to ask first since I really cant see behind the gobbed on rtv) I should note, it was really oily/wet inside the bellhousing and on this face of the transmission when I pulled it apart. Couldn't tell if it was from an oil leak or or a transmission leak.
No. It didn't come from the factory that way. You can change the seal yourself. If you stand the tranny on end, you can remove the front cover without disturbing anything.
Old Oct 11, 2006 | 05:31 PM
  #3  
SSQATCH's Avatar
Registered User
 
Joined: Jan 2005
Posts: 109
Re: Is this normal from the factory on a T56?

Off the top of my head I didn't think that surface was machined. It looks shiny around where the input shaft sits..... not sure what it means but maybe somebody tried to "quiet" a throwout bearing or something.

Definitly wierd,
TOM B
Old Oct 11, 2006 | 05:42 PM
  #4  
mobleman's Avatar
Thread Starter
Registered User
 
Joined: Mar 1999
Posts: 455
From: Syracuse, NY
Re: Is this normal from the factory on a T56?

Think I'll look through my records to see if the dealer mentioned anything...

Like I mentioned, Never had this out of the car myself, the only places that did any transmission work is the dealer and a speed shop in Metro Detroit.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jason Short
Parts For Sale
0
Jan 19, 2015 06:34 PM
cmdeshon
LT1 Based Engine Tech
2
Jan 4, 2015 11:15 AM




All times are GMT -5. The time now is 02:15 PM.