need help ASAP - what's the best way to drop the tranny pan in a 4L60??
#1
need help ASAP - what's the best way to drop the tranny pan in a 4L60??
Well my trans ****ed up bad this morning. I called Art Carr and they said it sounds like a possible broken input sprag.
I need to pull the pan and see what's in there.
What is the easiest/best way of doing this?
Front wheels on the rhino ramps and start loosening the rear bolts of the pan? Or should all 4 corners be on jackstands??
I don't want to get fluid everywhere. There's no drainplug in the pan.
Thank you so much for your help. I would like to try to do this today
I need to pull the pan and see what's in there.
What is the easiest/best way of doing this?
Front wheels on the rhino ramps and start loosening the rear bolts of the pan? Or should all 4 corners be on jackstands??
I don't want to get fluid everywhere. There's no drainplug in the pan.
Thank you so much for your help. I would like to try to do this today
Thread
Thread Starter
Forum
Replies
Last Post
carguyshu
Parts For Sale
20
01-22-2017 11:19 AM