lt1 posi fit a ls1 housing?
Thread Starter
Registered User
Joined: May 2002
Posts: 115
From: U.S
lt1 posi fit a ls1 housing?
Need to know if there would be any issues running a lt1 posi unit on a ls1 housing.Considering buying a lt1 posi with gears,but wanted to know what differences are in the ls1 posi over the lt1.
Moderator
Joined: Jul 1998
Posts: 6,247
From: Charlotte,MI USA
A 10 bolt is a 10 bolt.
The things that you have to worry about;
is the axle spline count the same? It has to be the same as yours.
does either one have an ABS reluctor ring? If your old one does then the new one needs to have one too. If yours doesn't then it doesn't matter whether the new one has one or not.
The things that you have to worry about;
is the axle spline count the same? It has to be the same as yours.
does either one have an ABS reluctor ring? If your old one does then the new one needs to have one too. If yours doesn't then it doesn't matter whether the new one has one or not.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM