Friendly Reminder (avoid problems)!!
#1
Friendly Reminder (avoid problems)!!
Just an FYI for you LT1 T56 guys. When you install a tranny and remove the bolt that holds down the clutch fork.... PUT LOCKTITE ON THAT BOLT!!!!!
Just a reminder. I had that bolt back out on me and made my car inoperable. When I pressed in the clutch, the fork rubbed the pressure plate and eventually stalled out the motor. (This happened in neutral and coasting. I pressed in the clutch and the motor died)
So I pulled the tranny, tightened the bolt (and added locktite), and re-installed it. Everything is running fine now.
Just wanted to give everyone a heads up.
Just a reminder. I had that bolt back out on me and made my car inoperable. When I pressed in the clutch, the fork rubbed the pressure plate and eventually stalled out the motor. (This happened in neutral and coasting. I pressed in the clutch and the motor died)
So I pulled the tranny, tightened the bolt (and added locktite), and re-installed it. Everything is running fine now.
Just wanted to give everyone a heads up.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
12-05-2014 11:42 AM